Services
Datum Alloys stocks and sources a large range of stainless steel in sheet and coil form which can be used for the stencil and/or etch industry. In addition to this we offer bar, plate and billet in a range of controlled expansion nickel iron alloys; stock, and can slit and tag, pure nickel and/or nickel plated mild steel.
Foil Processing
MORECoil processing and cut-to-length line
Designed to process light gauge strip.
| Min thickness: | 0.020mm |
| Max thickness: | 0.50mm |
| Max width: | 800mm |
| Max start coil size: | 2000kg |
| Max finish coil size: | 500kg |
MOREBrace slitting line
| Max starting width: | 320mm |
| Min slit width: | 2mm |
| Max slit width: | 300mm |
| Min thickness: | 0.05mm |
| Max thickness: | 1mm |
| Tolerances: | ±0.1mm |
MORETiéche micro slitting line
| Max starting width: | 100mm |
| Min slit width: | 1mm |
| Max slit width: | 6mm |
| Min thickness: | 0.02mm |
| Max thickness: | 0.2mm |
| Tolerances: | ±0.01mm |
MORESingle and multi-strand cut to length line
| Min cut length: | 1mm |
| Max cut width: | 120mm |
| Min thickness: | 0.01mm |
| Max thickness: | 0.30mm |
| Tolerances: | ±0.2mm |
Sheet and Bar Processing
MOREKasto SSB 260 bar saw
| Min size across flats: | 6mm diameter |
| Max size across flats: | 260mm diameter |
| Max bar length: | 6m |
| Max bar weight: | 500kg per metre |
| Min cut length: | 6mm |
| Tolerances: | ±0.2mm |
(can also cut tube, profiles and sections)
MOREKasto VP 320/660 plate saw
| Min thickness: | 3mm |
| Max thickness: | 320mm |
| Max plate size: | 4100mm x 2000mm |
| Max cut width: | 400mm |
| Tolerances: | ±0.5mm |
(includes blade deviation control)
Quality Management
We’re dedicated to achieving customer satisfaction by consistently meeting, and exceeding our customers' needs. To make sure this commitment remains a focus, we measure ourselves against objectives:
- Ensure a company wide commitment to quality
- Provide quality products and services sourced from quality suppliers
- Continuously review and improve processes and systems
- Implement the proper training of personnel
- Provide a cost effective service
- Provide a safe working environment
Being a small company, the managing director is involved in the supervision of the company processes. Therefore, the working of our quality system may be explained to each member of staff on an individual basis while undertaking normal procedures.